Product Name: Rubber Tyred Transtainer Gantry cranes
Lifting capacity: 10-800t
Rubber Tyred Transtainer Gantry cranes can handling different tons container,cargo, boat or yacht (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat into the water.
Rubber Tyred Transtainer Gantry cranes includes the following items: main structure, traveling wheel block, hoisting mechanism, steering mechanism, hydraulic transmission system and electric control system. The main structure is N type, which can transfer the boat with height surpass crane’s height.
According to different requirements of our customers, the Rubber Tyred Transtainer Gantry cranes can handling different tons container,cargo, boat or yacht (10T-800T) from the shore side, it can be used for the maintenance on the shore side or can put the new boat into the water. It has soft and firm belt to lift the Container,boat and yacht so that it will never hurt the surface.
Features of Rubber Tyred Transtainer Gantry cranes
1. For the gantry crane traveling, this Rubber Tyred Transtainer Gantry cranes can move in diagonal direction, it also can steer in 90 degree and put the boat in any designated position according to requirements.
2. This Rubber Tyred Transtainer Gantry cranes can be adjusted the width of the main girder according to the boat in case to handling different side boat.
3. This Rubber Tyred Transtainer Gantry cranes yacht handling crane is of low expense, high performance, easy to operate and maintenance and so on.
4. Low cost on the daily operation, it adopts the soft and firm belt to ensure there is no harm to the boat when hoisting.
5. It can make the boat in order quickly; it also can adjust the gap between each boat according to different condition.
Working Environment of Rubber Tyred Transtainer Gantry cranes
1. 3 phase A.C. 50HZ 380V
2. The temperature of the working environments is -20 ~ +45 degrees and.the Max relative humidity shall be less than 95%( with condensation);
3. Wind speed shall be less than 20m/s;
4. Working leave: A3, A4;
5. Special requests are available
1. Control panel protection degree is IP54;
2. Reasonable components installation, convenient for check and maintenance;
Safety Protection Devices
Overload limiter, limit switch, interlocking protection devices, buffer, track sweep plate, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.
Technical data of the Rubber Tyred Transtainer Gantry cranes
|Rated productivity priority
||16, 32 , 55
||Above Rail 18~24 Below Rail 1
|Proportion of material stack
|Trolley Traveling Speed
|Crane Traveling Speed
|Max Wheel Load
||10KV, 50Hz, 3Phase